Product Details

Dimensions

Ø 57 | H. 46 cm

Specifications

General info: Antique brass finish; hand blown glass

Lamp holder: E14

Lamp holder qty: 10

Light bulbs included: Not included

Voltage: 220 - 240 Volt

Hanging Method: Chain

Length hanging method in cm: 150

Length hanging method in inch: 59.06

Indoor/outdoor: Indoor use/dry locations only

LD52009-A

Finished in antique brass, it features 10 lights in a tapered, two-tiered design. The drops are made of hand-blown glass with a roughened backside, which produces a startling effect when the lamp is lit.

Brand：Gohigh Lighting

Item no：LD52009-A

Material：Antique brass finish; hand blown glass

Inquiry

QR code

Prev: LD52007-B

Next: LD52009-1A

Care Instructions

How to care for lighting with a metallic finish and glass or acrylic

● To maintain the beauty of your luxury lighting, we recommend the following simple guidelines. When cleaning a lamp, make sure you unplug the power cord first. Always make sure sprays or liquids can not get in the lamp fittings.

Cleaning & maintenance

● For general maintenance, periodically dust off your lighting with a feather duster or a soft clean cloth, preferably weekly.

Metallic finishes

● Use lukewarm water with a mild household detergent to clean metal finishes. Gently wipe the metallic surfaces, rods and parts with a soft, dampened cloth or chamois. Dry well with a clean, soft cloth. Never use cleaners with ammonia, bleach or hard chemicals and avoid paper towels or scouring pads.

Glass

● Never use abrasive materials for cleaning glass as they may cause scratches. Use appropriate glass cleaning solutions and a microfiber cloth. If you are using a chemical cleaner, take care not to spill it on any of the surrounding metallic finishes. After drying with a soft cloth, you can use a piece of crumpled newspaper to give the glass added shine and sparkle.

Acrylic

● Avoid commercial household cleaners because the chemicals in these products can dull and craze the acrylic. The best way to care for acrylic surfaces, rods and parts, is to clean with lukewarm water and a bit of liquid soap. Rinse with clear water and dry well. Always use soft cloths for cleaning as not to scratch the acrylic.